Filter
Top Products
6
2
English
Connecting the power
1.
Plug the round female connector from the power adapter into
the drive’s power connector.
2.
Plug the two-pin female connector on the power cord
into the power adapter.
Figure 4.
Connecting the Power
3.
Plug the standard electrical plug from the power adapter into
your power source.
Step 2. Power up your drive
Press the button on the front of your drive.
Your drive will now start up. This process requires up to one
minute to complete.
• The button light will turn yellow.
• When the light pulses green, your drive is ready and you can
move on to Step 3.
Your drive will be accessible on your network
approximately 10 seconds after the light turns green.
Figure 5.
Pressing the Power Button
Power button.