Filter
Top Products
PS7060 MULTIQUIP SAW • OPERATION MANUAL — REV. #2 (06/02/08) — PAGE 29
PS7060 MULTIQUIP SAW — BLADE GUARDS
1. Slide the Blade Guard straight downward to engage the
tapered Mounting Clip. (See Figure 17.)
Blade Guards with Standard Water Systems:
Blade Guards with Waterjet Water Systems:
1. Slide the Blade Guard straight downward to engage the
tapered Mounting Clip. (See Figure 17.)
2. Ensure that the water delivery tubes are pointed toward
the water distribution grooves in the Blade Flanges. (Figure
21.)
2. Connect the water delivery hose to the Blade Guard. (Figure
15.)
3. Ensure that the hose ends maintain a 45
o
angle and
maintain a light contact with the surface of the blade.
Figure 17. Tapered Mounting Clip
4. Ensure the front hinged section of the Blade Guard is fully
closed before use.
Figure 18. Water Hose Detail
3. Ensure the front hinged section of the Blade Guard is fully
closed before use.
Figure 19. Water Tube Detail (Inner side)