Filter
Top Products
1 Operator’s Panel
14
Optional machine control board
Bel
ow the operating items of machine control board delivered by NCT are described. The lighting
state of LED in the top left corner of buttons shows, that the function indicated by the key is
active.
Emergency stop. By its depressing the NC registers the emergency stop state,
shuts down all movements, and cuts its outputs off the machine. It can be
undone by rotating the head of the button in the direction of the arrow. For
more details of its functioning turn to the machine tool builder for an
information material.
Machine on button. By affecting it, if the machine is not in emergency stop state (e.g.
the emergency stop is not in held down state) the control and the machine link. Other
parts of the machine, e.g., hydraulics, etc. come into effect. For more details about the
power-on process of the machine turn to the machine tool builder.
Operation mode selectors:
Jog
Incremental jog
Manual handle
Manual reference point return
Edit