Filter
Top Products
3.6 SETTING Screens
50
actions in the menu bar, the meaning of which is the usual. With Exec in effect the
selected line is cleared.
Save Action: When pressing the key the program number can be entered into the bottom data
input line. In case the input is terminated by any of the keys or , the
program can also be named there. As the effect of keys and values are
saved in the appropriate macro variable. It is registered in the directory not under
program number O, but under address T. Restoring values of the table is discussed in
the chapter 3.3.1 on the page 30 “DIRECTORY Screen” Run action menu Table
action.
3.6.6 PLC TABLE Screen
In the general displaying area the
PLC table can be seen. Its length
is specified in parameter 0062
PLC_TAB. The table can be
optionally used by the machine
tool builder.
The contents of the table are
preserved upon power-off.
The highlighting bar can be
moved along the items of table
by means of arrow keys
and .
The items of the table can be
overwritten.
For information on usage of the table turn to the machine tool builder.
Actions of PLC TABLE Screen
The following actions can be activated by pressing action menu key :
Clear
all 1
Save
234567890
Clear All Action Menu: When pressing the key the question CLEAR ALL? can be seen in
the bottom left part of general displaying area, together with Exec and Cancel actions
n the menu bar, the meaning of which is the usual. With Exec in effect the entire table
is cleared..
Save Action: When pressing the key the program number can be entered into the bottom data
input line. In case the input is terminated by any of the keys or the