Filter
Top Products
3.6 SETTING Screens
51
program can also be named there. As the effect of keys and values are
saved in the appropriate macro variable. It is registered in the directory not under
program number O, but under address T. Restoring values of the table is discussed in
the chapter 3.3.1 on the page 30 “DIRECTORY Screen” Run action menu Table
action.
3.6.7 USER’S PARAMETERS Screen (User’s Params)
In the general displaying area a
restricted part - that can also be
set by the user - of the parame-
ters can be seen. The highlight-
ing bar can be moved along the
groups seen in general displaying
area by means of arrow keys up
and down. The selected group
can be opened with the help of
arrow key right, while with
arrow key left the previous level
can be displayed. If the
highlighting bar stands on a pa-
rameter, a new value can be
given to the parameter in the
bottom line of general displaying
area.
Actions of USER’S PARAMETERS Screen
No action menu can be activated to this screen, a blank action menu is displayed by pressing
action menu key , however the values of parameters can be changed only in this state.
Editing of parameters is only permitted in EDIT mode.