Filter
Top Products
MATWorX 32 User’s Guide
Page 20 NDA-24215 Revision 1.0
Installing MATWorX 32
MATWorX 32 Installation Instructions
To install MATWorX 32 for the first time, or to return
to Setup later to add optional features or Help files you
didn’t install the first time, you must use the
installation CD included in your MATWorX 32
package. You must run Setup from Windows.
Important: Be sure to close all
Windows programs
and screen savers that are running and
disable any virus detection programs
before using the Setup program.
The following procedure walks you through the
installation of MATWorX 32. The Setup consists of a
series of dialogs that supply you with default answers
to questions regarding the installation of files to your
hard disk. To accept the default answers, click the
Next
button. To make changes, click the
Browse
button and select a different directory, then click
OK
to return to the dialog box.
Note: The following procedure assumes you are
starting the Setup program from your
computer’s CD-ROM drive
D:
. If you start
from a different drive, substitute the letter of
that drive in this procedure.
1. Launch Microsoft Windows 95 or NT version 4.0
or higher on your computer.
2. Place the MATWorX 32 CD in the CD-ROM
drive.