Filter
Top Products
MATWorX 32 User’s Guide
Page 34 NDA-24215 Revision 1.0
Getting Started
✓ PBX power is off
✓ A valid station number is not assigned to the
built-in PBX modem
☞
Bus
y
Si
g
nal
Action: Listen to the modem while it dials to
determine that a busy signal is received.
Reasons:
✓ Incorrect phone number
✓ PBX modem is being accessed by another
user
☞
Rin
g
and Answer, but no connect
messa
g
e
Action: Listen to the modem while it dials to
determine that the PBX answered. Watch for a
Connect message.
Reasons:
✓ PC modem's highest speed is less than the
PBX modem's speed
✓ Inappropriate initialization string
☞
Connect messa
g
e, but no carrier detect
messa
g
e
Action: Listen to the modem while it dials to
determine that an answer was received. Watch
for the Connect message, followed by the
Carrier Detect message.
Reason: Possible incorrect PBX command.
Do not use PBX Command 40, YY=11, Second
Data = 5.
Note: If you are an advanced user, you can change
any of the PBX configuration settings using
the
PBX Configuration
dialog. This dialog
is accessed from the PAM by selecting
PBX
Configuration
from the
Edit
menu, then
selecting
Dialog View
.