Filter
Top Products
Extended Command Set
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 63
LX (where X represents any command from the
NEAX2000 IVS Command Set) Performs a
lookup and listing of all Second Data. (For
example, L10 retrieves all LEN assignments.)
This Extended Command cannot be used
with any other Extended Commands in a
script; it must be the only command line in
a script.
LFX (where X represents any command from the
NEAX2000 IVS Command Set) Performs a
filtered lookup and listing of all existing
Second Data. (For example, LF10 retrieves
all existing LEN assignment data, but leaves
out data for the unassigned LENs.) This
Extended Command cannot be used with
any other Extended Commands in a
script; it must be the only command line in
a script.