Filter
Top Products
Error Codes
MATWorX 32 User’s Guide
NDA-24215 Revision 1.0 Page 65
Appendix B Error Codes
The following error codes are generated by
MATWorX 32 and displayed in the Error text box on
the MATWorX 32 Taskbar. These messages indicate
processing errors generated in the PBX or the PAM
while performing tasks within MATWorX 32.
All error codes contain five digits, the first two
beginning with 10. The remaining three digits are
divided into four series beginning with 100, 200, 300,
or 400.
• Series 100 errors are generated by the PBX
Interface Class, indicating an error occurred inside
the PBX while performing a requested operation.
• Series 200 errors are currently not implemented.
• Series 300 errors are generated by the PDQ Comm
Class, indicating a communication error occurred
while talking with the PBX.
• Series 400 errors are generated by the Save/Load/
Verify (SLV) Class, indicating an error occurred
while performing a save, load, or backup
operation.
Series 100 Error Codes
No Error (Message 10100)
Object Not Registered (Error 10101)
Port Not Open (Error 10102)
Port Not Selected (Error 10103)
Failed to Connect (Error 10104)
Data Error (Error 10105)
Digit Error (Error 10106)
Time Out (Error 10107)
Checksum Error (Error 10108)
No File Defined (Error 10109)