Filter
Top Products
Rev.1 - YML632 www.netcomm.com.au
ADSL Modem Router Page 11
2-2 Front Panel LEDs
The following figure shows the front view of the NetComm ADSL Modem Router.
The LEDs on the front panel indicate the status of the unit.
Power: Green On when power is on.
Diag: Red Lights up during system check when the power is initially
connected. If the Router is working properly, the light should
switch off after the diagnostic has been completed.
ADSL port
Link: Green Blinking when ADSL line is training.
On when ADSL line is ready.
Activity: Yellow Blinking when data is being received/transmitted through ADSL
line.
LAN ports
Link/ACT: Yellow On when link is up and operating at 10Mbps.
Green On when link is up and operating at 100Mbps.
Yellow/ Green Blinking when data is being received/transmitted through the
LAN port.
FD/COL: Green On when operating at full duplex mode (10/100M).
Blinking when a collision is occurring on the port.