Patton electronic 2621 Router User Manual


 
Introduction to NAT 81
Models 2603, 2621, and 2635 Getting Started Guide 7 • Security
Click on Add Global Address Pool button.
Figure 53. NAT Global Address Pool configuration
4. Next, create a reserved mapping between a global IP address from the global pool and a PC on the side of
the internal interface (’ip1’). In this example, 10.10.19.11.
5. Click on the hyperlink Add Reserved Mapping...
6. Set the parameters to the following values (See figure 54.):
Global IP Address: 100.100.100.101
Internal IP address: 10.10.19.11
Transport Type: all
Port Number: 65535(This port number means all port numbers for TCP or UDP protocols will be
mapped.)
7. Click on Add Reserved Mapping.
Figure 54. NAT Reserved mapping configuration
The PC on the Ethernet side of the IPLink can now communicate with the ‘public’ or ‘global’ side
through NAT.