Filter
Top Products
11
Carton #
2
-
Stand
:
Refer to Figure 12.
1 Stand with motor (N)
1 pulley cover (O)
1 fence body (P)
2 hardware packages, as follows.
Hardware package #3 contains:
Refer to Figure 13.
2 fence hooks (HP3-A)
2 miter gauge hooks (HP3-B)
1 blade hook (HP3-C)
2 pulley cover knobs (HP3-D)
4 carriage bolts, M8x16 (HP3-E)
4 flanged hex nuts, M8 (HP3-F)
2 pan head screws, M5x12 (HP3-G)
2 pan head screws, M4x10 (HP3-H)
Hardware package #4 contains:
Refer to Figure 14.
1 resaw pin (HP4-A)
1 resaw pin knob (HP4-B)
1 fence rear hook (HP4-C)
2 hex nuts, 1/4” (HP4-D)
1 flat washer, 1/4” (HP4-E)
1 lock washer, 1/4” (HP4-F)
1 sliding pad (HP4-G)
4 hex cap screws, 5/16”x3/4” (HP4-H)
4 lock washers, 5/16” (HP4-J)
4 flat washers, 5/16” (HP4-K)
7 hex cap screws, M6x20 (HP4-L)
7 lock washers, 1/4” (HP4-M)
7 flat washers, 1/4” (HP4-N)
(*) the identifying letters/numbers in parentheses are
used throughout the text to clarify assembly. For
actual part numbers if re-ordering, see the part
breakdowns at the back of this manual.
Figure 12
Stand carton
Figure 13
Hardware package #3
(stock no. PWBS14-HP3)
Figure 14
Hardware package #4
(stock no. PWBS14-HP)