Filter
Top Products
iv
Po werware 9350 Series 685 and 1085 Auxiliary Battery Cabinets
Installation Manual 164201408 Rev. P00 053002
UPS Systems Using Series 685 and Series 1085 Battery Cabinets
• Powerware 9350 ( 30 kVA---80 kVA)
• Powerware9350(100kVA---160kVA)
Conventions Used in This Manual
The text in this manual uses these conventions:
• Bold type highlights important concepts in discussions and key terms in
procedures.
• Italic type highlights notes and new terms where they are defined.
• Rectangular boxes containing bold type are warnings or cautions that pertain to
the battery system or its electrical connections.
In this manual, the term UPS refers only to the UPS cabinet and its internal
elements. The term UPS system refers to your entire power protection system—the
UPS cabinet plus battery cabinets that you have installed.
Read through each installation procedure before you begin it. Perform only those
procedures that apply to the battery system you are installing.
NOTE: The term “Se parate” refers to battery cabinets that are not physically
attached to the UPS, are wired with external contractor supplied wiring, and
use a single overcurent protection and disconnect device located near the
batteries.
The term “Integral” refers to battery cabinets that are physically attached to
the UPS and the wiring between them is internal. The power wiring is
supplied with the system, and they use the UPS battery switch as the battery
isolation device.