Filter
Top Products
5 – Diagnostics and Troubleshooting
Recovering a Router
SN0051102-00 A 5-5
A
Recovering a Router
You may have to recover a router for one of the following reasons:
The password was changed and has been forgotten.
The router’s management IP address is unknown.
To recover the router’s password, reset the password to the default by using the
maintenance button (see page 2-8).
You can recover the router’s IP address using either of the following methods:
Connect to the serial console port (see page 2-13), then use the CLI set
mgmt command reconfigure the management port (see the iSR6142 Router
CLI User's Guide).
Use the maintenance button to reset the management port’s IP to the factory
default of 10.0.0.1 (see page 2-8).