Filter
Top Products
A – Log Messages
Fatal Log Messages
SN0051102-00 A A-25
A
System
The system modules generate the error log messages listed in Table A-12 and
described following the table.
Fatal Log Messages
The following sections list and describe the fatal log messages by reporting
module:
“iSCSI Driver” on page A-25
“FC Driver” on page A-28
“TOE Driver” on page A-30
“System” on page A-31
iSCSI Driver
The following fatal log messages are common to both iSCSI ports, 1 (GE1) and 2
(GE2). They are listed in Tabl e A- 13 and described following the table. Log
messages beginning with #0 denote iSCSI port 1 (GE1). Log messages beginning
with #1 denote iSCSI port 2 (GE2).
Table A-12. System—Error Log Messages
ID Log Message No.
237572 "Failed to kill sys killer %d\n" 4
237573 "Temperature over high threshold %d\n" 5
4 Failed to kill system task.
5 Reporting router exceeds maximum operating temperature.
Table A-13. iSCSI Driver—Fatal Log Messages
ID Log Message No.
69652 #%d: qlutm_init: Diagnostic failed, invalid SRAM 20
69653 #%d: qlutm_init: Diagnostic failed, fail reboot 21
69654 #%d: qlutm_init: Diagnostic failed, invalid NVRAM 22
69655 #%d: qlutm_init: Diagnostic failed, invalid DRAM 23
69656 #%d: qlutm_init: Failed to return diagnostic result to Bridge 24