Filter
Top Products
A – Log Messages
Error Log Messages
SN0051102-00 A A-19
A
329 The iSCSI processor failed the external loopback test.
337 The iSCSI processor command to disable a GE port failed.
513 The iSCSI processor could not connect with the iSCSI name server (iSNS).
849 The iSCSI processor reported that the iSCSI port NVRAM contains invalid
data (checksum error).
859 The iSCSI processor reported a link down condition.
928 The driver failed to receive a heartbeat from the iSCSI processor for the
specified number of seconds.
933 The driver timed out an iSCSI processor operation and is aborting the oper-
ation.
935 The driver timed out an iSCSI processor mailbox command.
937 The driver timed out while attempting to reconnect with the iSNS.
1056 The driver’s initiator database is full. The driver is capable of storing
1024 iSCSI initiators in its database. Use the CLI or the SANsurfer Router
Manager to remove unwanted/unused iSCSI initiators.
1072 The driver’s target database is full. Use the CLI or the SANsurfer Router
Manager to remove unwanted/unused iSCSI targets.