Filter
Top Products
¸
C_i _:!:iin:motoK pdiley and:place:Pulley:iOn
h_ f|U_h:! _itt+ end i: sfiaf_ii ihSertlmotif:r:
The motor rn_:$
_iewed from +PULLEY end:
1_ Place m0tor on your workbench or on floor.
2. Stand clear of motor and plug cord into a properly
grounded outlet (See page5). Notice rotation of pulley,
If it is:not= turning COUNTERCLOCKWISE, REMOVE
plug from outlet, and change rotation of motor accord-
ing to instructiOns furnished with motor;
WARNING: FOR YOUR OWN SAFETY, MAKE SURE
PLUG iS NOT CONNECTED TO POWER SOURCE OUT-
LET WHEN CHANGING ROTATION.
5/32 IN.
SETSCREW
WRENCH
DIRECTION
OF
ROTATION
\
FLUSH HERE
MOTOR
SHAFT
KEY
• ':
MOUNTING MOTOR
1. Find four 5/16_t8 x 3/4" carriage bolts, flat washers,
and lockwasher and nuts.
2, Attach motor by inserting carriage bolts through slots in
motor base and through slots in motor support. Place a
fiat washer, 10ckwasher and nut on each carriage bolt,
but DO NO:F TIGHTEN nut.
I == ::;1
MOTOR MOUNT BRACKET
..... j ,
@
BELT
6, Install three clips on belt guard 90° apart with long tabs
pointing AWAY from round opening.
7, Insert belt into open end of guard,
10
/
_*_BELT GUARD CLIPS
(90 ° APART)