Filter
Top Products
: 3/4,:'Wrench : : :_. :.
:3/8_,Wrench : i:::i: :
: :::i:: ::_ : _ .......
Model t13.20680 JointeriPlaner iS shipped ¢_mplete
'one. cartOn, but DOES NOT INCLUDE Stee| Legs.
motori ..... ..... ......
in
or
Model t13.206930 Jointer/Planer is shipped comp!lete in
one carton but INCLUDES Steel Legs, and Motor.
Separate all: parts from packing materials :and check each
one with the illustration and the list of Loose Parts to make
certain all items are accounted for, before discarding any
packing material.
If any parts are missing, do not atternPt:t O assemble the
jointeriplaner, plug '_n the power Cord Or turner the switch
On until the missing parts are obtained:and are installed
correctly.
Remove the protective oil that is applied to, e!li :unpainted
metal 'surfaces. Use any ordinary household! type grease and
spot remover.
CAUTION: Never use gasoline,: naptha or similar highly
::volatile solvents.
Apply a coat of automobile wax to the table.
Wip e all parts thoroughly with a clean_ dry cioth.
WARNING: ....: :
FOR NEVER
:CONNECT PLUG TO POWER :SOURCEOUTLET U:NTIL
'ALL ASSEMBLY STEPS ARE COMPLETE, AND YOU
: : V
Item
No.
Combination Square
TABLE OF LOOSE PARTS
Description Qty.
A Jointer-Planer ...................... 1
B V-Belt, t/2 x 52" . .................. t
C 5/32 Setscrew Wrench ................ 1
D t/8 Setscrew Wrench ................. 1
E Motor Pulley, 2-1/2 °" Dia .............. 1
F Sliding Guard Knob .................. t
G Concave Washer ..................... 2
H Sliding Guard ...................... 1
J Sliding Guard Rod ................... 1
K Nut, 1/2 - t3 ....................... 1
L Lockwasher, 1/2 .................... t
M Lockwasher, No. 10 ................. 2
N Screw, Pan Hd. t0 - 32 x t/4 .......... 2
O Owners Manual ..................... 1
P Depth of Cut Handwheel .............. !
Q Screw, Sems, t/4 - 20 x 1-1/4 .......... 1
R Jointer-Planer Belt Guard ............. 1
S Attaching Hardware (2 Nuts, 2 Bolts)
T Motor Pulley Belt Guard .............. 1
U Belt Guard Clips .................... 3
V Belt Guard Support Bracket ........... t
W Belt Guard Support .................. 1
X 2 self tapping screws
Y Switch Key ........................ 1
Z Hold Down/Push Block ............... 2
0