Sears 113242502 Saw User Manual


 
LUBRnCATUON
The saw motor bearings have been packed at the factory
with proper lubricant and require no additional {ubrication
1 Lay the saw on its LEFT SIDE.
2 Ciean the folfowing parts with Craftsman Gum and
Pitch RemoVer; BEVEL GEARS, ELEVATION WORM
AND TEETH, T_LT WORM AND TEETH
Lubricate these parts and other bearing points indicated,
with SAE No 20 or No. 30 engine oi!
The following parts should be oiled occasionally with SAE
No 20 or No 30 engine oil
Bearing points in guard assembly and rip fence
GUARD _"
BEARING POINTS
\ BEVEL GEARS
ELEVATION
WORM AND TEETH
,_. TILT WORM AND TE_TH
RECOMMENDED ACCESSORIES
ITEM CAT., NO. ITEM CAT.. NO
Casters .......................... 9-22222 or 9-22221
7 In Motding Head Set ............................ 9-3217
7 In Molding Head Set ........................ 9-32t8
7 In. Molding Head ........................ 9-32t4
Dado/Molding Insert for 7 in.
Die Molding or Dado Head ................. 9-29997
Work Light .................................. 9-2480
Work Light .................................... 9-2481
7 in Dia. Adjustable Dado Head ............. 9.,3263
7 In. Diao Dado Head ............................ 9..3257
Sanding Wheel ..................................... 9-22723
Miter-Gauge Stop Rods ............................. 9-29924
Miter-Gauge Hold-Down Clamp ................ 9-29928
Taper Jig .................................. 9-3233
Universal Jig ................................... 9-3235
Power Took Know How Handbook
Table Saw .................................. 9-2918
27