Shindaiwa DGW310MC Welder User Manual


 
20
Danger: Suffocation from exhaust fume
Exhaust fume from engine contains many elements harmful to human. Do not operate this
equipment in poorly ventilated area such as inside room or in tunnel
Caution: Suffocation from exhaust fume
Do not point the exhaust fume toward pedestrians or building.
Caution: Fire
Temperature around muffler and exhaust can get extremely high. Keep any inflammable items
(such as fuel, gas, paint, etc.) away from the equipment.
Always operate this equipment on flat surface and at least 1 meter away from any objects (wall,
box, etc.)
Caution: Injuries
Always place the equipment on flat and stable surface to keep the equipment from sliding and lock
wheels if they have.
Before starting, turn the load switch OFF and set the
Equipment breaker OFF .
7-1. Starting
1. Turn the breakers to OFF .
2. Turn the fuel lever to OPEN .
3. Turn the Slow-Down Switch to ON .
4. When the temperature is below 5 turn and keep the starter Switch at PREHEAT until the preheat
lamp turns OFF (about 5 seconds).
5. Turn the starter switch to START . And then the engine starts by the starter motor.
CAUTION
Do not drive the starter motor for more than 15 seconds successively.
If you need to restart, wait for 30 seconds or more before retry.
6. Once the engine has started, release hand offs the starter switch.
Caution
Once the engine has started, never turn the switch to
START .
7. Operation
7. Operation7. Operation
7. Operation