Shindaiwa DGW310MC Welder User Manual


 
35
Caution
Clean more frequently when it is used in dusty environment.
Air Element Part No.: 1G347-11181 (Kubota)
(4) Clean/Change Fuel Strainer
Clean 1
st
at 50 hrs 2
nd
or after 200 hrs
Change Every 400 hrs
1 Turn the fuel lever to CLOSE .
2
Unscrew the retainer ring counterclockwise
And remove the cup and filter element.
3
Discard any dust or water inside the cup
and clean the filter by blowing compressed
air. (or replace element)
4 Reassemble it back.
Caution
Be sure to check for any contaminants on the packing whenever reinstalling the cup.
Be sure to confirm no fuel leakage by opening the fuel lever
to OPEN . Turn the lever to CLOSE finally after confirmation.
Fuel Element Part No.: 16271-43561 (Kubota)
(5) Drain water in fuel tank
Drain At every 200 hrs
1 Unscrew the fuel drain plug.
2 Reinstall the drain plug after draining
water completely.
Caution
Change the packing whenever draining water
.
Packing Part No.: 6C09058961 (Kubota)
Confirm no fuel leakage after reinstalling the fuel drain plug.
Fuel Drain P
lug
Retainer ring
Cup
Fuel lever
Close
Open