Filter
Top Products
2
Danger: Suffocation from exhaust fume
● Exhaust fume from the engine contains many elements harmful to human.
Do not operate this equipment in poorly ventilated areas, such as inside a
room or in a tunnel.
Danger: Electric Shock
● Do not touch the output terminals during operation
● Do not insert metal objects (such as pin or wire) into receptacle
● Do not touch wires or electric parts inside the equipment during operation.
● Before connecting or disconnecting a load cable from output terminals, always turn the circuit
breaker to OFF position.
● Before connecting or disconnecting a load cable from output terminals, always turn the circuit
breaker to OFF position.
● Before connection or disconnection a welding cable from DC output terminal, stop the engine
and remove the engine key.
● Before performing any equipment check or maintenance, stop the engine and remove the
engine key. A maintenance person should always keep the key.
Danger: Burns
● Do not open the radiator cap while operating this equipment or immediately after stopping the
equipment, to avoid sustaining burns from hot vapor.
Danger: Injuries
● Close all doors and place locks during operating this equipment, to avoid injuries by
unintentional touching a cooling fan and fan belt.
Caution: Suffocation from exhaust fume
● Do not point the exhaust fume toward pedestrians or building.
Caution: Suffocation from exhaust fume
● Be sure to wear a fume proof mask in operation, because welding fume contains poisonous gas
and dust. Pay attention to the airflow direction and ventilation also in order to prevent from
inhaling the fume.
1. Safety Guidelines
1. Safety Guidelines1. Safety Guidelines
1. Safety Guidelines