Filter
Top Products
-15-
W1770 21" Bandsaw w/Foot Brake
SETUP
Although not required, we recommend that you mount
your new bandsaw to the floor. Because this is an optional
step and floor materials may vary, floor mounting hard-
ware is not included. You must use a precison level to
level your machine.
You may also mount your bandsaw to a mobile base with-
wheel locking or wheel retracting capabilities that keep
the mobile base from rolling when the bandsaw is in use.
Bolting to Concrete Floors
Lag shield anchors with lag bolts and anchor studs (Figure
12) are two popular methods for anchoring an object to a
concrete floor. We suggest you research the many options
and methods for mounting your machine and choose the
best that fits your specific application. Figure 13 shows
the mounting locations for this machine.
Mounting to Shop Floor
NOTICE
Anchor studs are stronger and more permanent alter-
natives to lag shield anchors; however, they will stick
out of the floor, which may cause a tripping hazard if
you decide to move your machine at a later point.
Figure 12. Typical fasteners for mounting
to concrete floors.
Lag Screw and Anchor
Anchor Stud
Figure 13. Location of machine base
mounting locations.
Base Mounting Locations
(3 of 4 shown)