Filter
Top Products
-2-
W1770 21" Bandsaw w/Foot Brake
INTRODUCTION
Woodstock Technical Support
This machine has been specially designed to provide many years of trouble-free service. Close attention
to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation.
Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to
include the basic information for safety, setup, operation, maintenance, and service of this product.
We stand behind our machines! In the event that questions arise about your machine, please contact
Woodstock International Technical Support at (360) 734-3482 or send e-mail to: tech-support@shopfox.
biz. Our knowledgeable staff will help you troubleshoot problems and process warranty claims.
INTRODUCTION
If you need the latest edition of this manual, you can download it from http://www.shopfox.biz.
If you have comments about this manual, please contact us at:
Woodstock International, Inc.
Attn: Technical Documentation Manager
P.O. Box 2309
Bellingham, WA 98227
Email: manuals@woodstockint.com
Functional Overview
The bandsaw is one of the most versatile cutting
tools in the shop and is capable of the following
cuts:
• MitersandAngles
• CompoundAngles
• ResawCuts
• RipandCrosscuts
• CurvesandCircles
• StackedCutsforDuplicateParts
The blade is a flexible steel band with teeth on
one edge that fits around two aligned wheels
with slightly crowned rubber tires, which help
the blade track in the center of the wheels dur-
ing operation.
One wheel stays in a fixed position and is driven
by a motor. The other wheel spins freely and is
adjustable toward or away from the fixed wheel,
which controls the tension of the installed blade.
This wheel also features a tracking control that
allows the wheel to tilt forward or backward to
adjust how the blade rides on the wheel. The
rotation of both wheels pulls the blade down-
ward toward the table.
When a workpiece is pushed against the mov-
ing blade, the downward force of the blade
teeth scrape across the workpiece and cut it.
Blade guides on both sides of the cutting area
keep the blade from flexing or being pushed off
the wheels from the horizontal pressure of the
workpiece while cutting.
Since the purpose of the blade guides is to pro-
vide support while cutting, they should be as
close as possible to the blade; however, the
blade guides should only touch the blade while a
workpiece is being cut, or the constant friction
will reduce the life of the blade. Also the upper
blade guide assembly should be adjusted as close
as possible to the workpiece to provide maxi-
mum support and safely cover any unused area
of the blade with the blade guard.
Also, a foot brake can be used to cut power to
the motor, quickly bringing the blade to a halt.