Filter
Top Products
-46-
W1770 21" Bandsaw w/Foot Brake
MAINTENANCE
Lubricant Frequency Quantity
Multi-Purpose
GL2 Grease
As Needed Thin Coat
Table Tilt Rack and Pinion Assembly
To lubricate the table tilt rack and pinion assembly, do
these steps:
1. DISCONNECT BANDSAW FROM POWER!
2. With the table perpendicular to the blade, and using
a rag and mineral spirits, wipe off all existing grease
and sawdust buildup from the rack.
3. Movethetableuptoitsmaximum45˚angleand
wipe (Figure 65) off all existing grease and sawdust
buildup from the rack.
4. Apply a thin coat of muilti-purpose grease to the
rack.
5. Move the table up and down several times to distrib-
ute the grease, then wipe off any excess grease.
Figure 65. Table tilt rack and pinion
assembly.
Lubricant Frequency Quantity
Multi-Purpose
GL2 Grease
As Needed Thin Coat
Trunnion
To lubricate the trunnion, do these steps:
1. DISCONNECT BANDSAW FROM POWER!
2. Movethetableupuntilitreachesitsmaximum45˚
angle, and using a rag and mineral spirits, wipe off
all excess grease and sawdust from the trunnion.
3. Apply a thin coat of light all purpose grease to the
outside surfaces of the trunnion (Figure 66).
4. Move the table down and then back up to distribute
the grease, then wipe off any excess grease from
the trunnion.
Figure 66. Trunnion lubrication location.