Filter
Top Products
-35-
Df[\cN(/(0&N(/)'D]^%J`eZ\('&('
FG<I8K@FEJ
9cX[\@ejkXccXk`fe
The saw blade is sharp. Use extra care or wear
gloves when handling the blade or working near it.
Review this section, even if your saw blade came pre-
installed.
Kf`ejkXcck_\YcX[\#[fk_\j\jk\gj1
(% DISCONNECT THE SAW FROM POWER!
)% Put on heavy leather gloves and raise the arbor all
the way up.
*% Remove the table insert and blade guard/riving
knife, depending on what is installed.
+% Use the arbor wrenches to loosen and remove the
arbor nut, flange, and blade.
Efk\1 K_\XiYfielk_Xji`^_k_Xe[k_i\X[j2klie`k
Zflek\iZcfZbn`j\kfcffj\e%
,% Slide the blade over the arborwith the teeth facing
the front of the saw, as shown in =`^li\++%
-% Re-install the arbor flange and the arbor nut (see
=`^li\+,), and tighten them against the blade with
the wrenches included with the saw. DO NOT over-
tighten.
=`^li\++% Example of correct blade
direction.
Teeth Direction
& Blade Rotation
Front
of Saw
=`^li\45% Blade installation.