Stanley Black & Decker RW30 Welding System User Manual


 
28 - RW30 USER MANUAL
Bearing Y Axis 66533
Bearing X Axis 64950
Nut 66529
Coupling, Y Axis 66535
Power Cable (115V) 68209
Pad Clamp 70775
Beam, Souriau 70779
Template guage for setting the stick
height (see page 13).
Removing wire feed tip using hex in
template guage.
Master Power
Switch Off
Master Power Switch On, this picture indicates the fan is on but the outside
ambient temperature is below -10°C/14°F, allow the unit to warm-up until the
left power light comes on indicating the unit is safe to use. Do not operate the
unit when the left power light is off with the power switch turned on.
Master Power Switch
and Fan On.
MASTER POWER SWITCH 2009 OR EARLIER
TEMPLATE GUAGE
Template guage with 4 height set-
tings indicated in milimeters and
inches.
MASTER POWER SWITCH 2010 OR LATER
Master Switch OFF Power is On Heater Activated Unit On Heater Activated Unit On Heater Off
Male Crosspin Knob M10-45
73158
No Photo
SPARE PARTS