Filter
Top Products
30
Super Finish 7000
GB
c ontent s
Contents
1 SAFETY REGULATIONS FOR AIRLESS SPRAYING 31
1.1 Flash point _________________________________ 31
1.2 Explosion protection _________________________ 31
1.3 Danger of explosion and re from sources of
ignition during spraying work _________________ 31
1.4 Danger of injury from the spray jet _____________ 31
1.5 Secure spray gun against unintended operation __ 31
1.6 Recoil of spray gun __________________________ 31
1.7 Breathing equipment as protection against
solvent vapors ______________________________ 31
1.8 Noise protection ____________________________ 31
1.9 Prevention of occupational illnesses ____________ 32
1.10 Max. operating pressure ______________________ 32
1.11 High-pressure hose (safety instructions) _________ 32
1.12 Electrostatic charging
(formation of sparks or ames) ________________ 32
1.13 Use of units on building sites and workshops _____ 32
1.14 Ventilation when spraying in rooms ____________ 32
1.15 Suction installations _________________________ 32
1.16 Earthing of the object ________________________ 32
1.17 Cleaning the unit with solvents ________________ 32
1.18 Cleaning the unit ___________________________ 32
1.19 Work or repairs at the electrical equipment ______ 32
1.20 Work at electrical components _________________ 32
1.21 Working with a number of guns ________________ 32
1.22 Transport using a crane ______________________ 32
1.23 Setup on an uneven surface ___________________ 33
2 GENERAL VIEW OF APPLICATION ____________ 33
2.1 Application ________________________________ 33
2.2 Coating material ____________________________ 33
2.2.1 Coating materials with sharp-edged additional
materials __________________________________ 33
2.2.2 Filtering ___________________________________ 33
3. DESCRIPTION OF UNIT _____________________ 34
3.1 Airless process ______________________________ 34
3.2 Functioning of the unit _______________________ 34
3.3 Explanatory diagram _________________________ 35
3.4 Transportation ______________________________ 35
3.5 Transport using a crane ______________________ 36
3.6 Technical data Super Finish 7000 _______________ 36
4 STARTUP _________________________________ 37
4.1 Unit with suction system _____________________ 37
4.2 High pressure hose and spray gun ______________ 37
4.3 Connection to the mains network ______________ 38
4.4 Cleaning preserving agent when starting-up of
operation initially ___________________________ 38
4.5 Ventilate unit (hydraulic system) if the sound of
inlet valve is not audible ______________________ 38
4.6 Taking the unit into operation with
coating material ____________________________ 38
5 SPRAYING TECHNOLOGY ___________________ 39
6 HANDLING THE HIGHPRESSURE HOSE _______ 39
6.1 High-pressure hose __________________________ 39
7 INTERRUPTION OF WORK ___________________ 39
8 CLEANING THE UNIT _______________________ 40
8.1 Cleaning the unit from the outside _____________ 40
8.2 Suction lter _______________________________ 40
8.3 High-pressure lter __________________________ 40
8.4 Cleaning the Airless spray gun _________________ 41
9 SERVICING ________________________________ 41
9.1 General servicing ___________________________ 41
9.2 High-pressure hose __________________________ 41
10 REPAIRS AT THE UNIT ______________________ 41
10.1 Inlet valve Pusher ___________________________ 41
10.2 Inlet valve _________________________________ 42
10.3 Outlet valve ________________________________ 42
10.4 Pressure control valve ________________________ 43
10.5 Relief valve ________________________________ 43
10.6 Replacing the diaphragm _____________________ 43
10.7 Replacing the power cable ___________________ 44
10.8 Typical wear parts ___________________________ 44
10.9 Connection diagram _________________________ 45
10.10 Remedy in case of faults ______________________ 46
11 SPARE PARTS AND ACCESSORIES ____________ 47
11.1 Super Finish 7000 accessories _________________ 47
11.2 Spare parts list Pump head ___________________ 49
11.3 Spare parts list Pump-Aggregate ______________ 50
11.4 Spare parts list high-pressure lter _____________ 52
11.5 Spare parts List Trolley _______________________ 52
11.6 Spare parts list suction system (rigid) ___________ 53
11.7 Spare parts list hopper _______________________ 53
Testing of the unit ________________________________ 54
Important information on product liability_____________ 54
Note on disposal __________________________________ 54
Guarantee declaration _____________________________ 54
CE - declaration___________________________________ 55
European service network __________________________ 56