Filter
Top Products
Operation 13
MAN0155 (Rev. 2/16/2007)
PRE-OPERATION CHECK LIST
(OWNER'S RESPONSIBILITY)
___ Review and follow all safety rules and safety
decal instructions on pages 3 through 7.
___ Check that all safety decals are installed and in
good condition. Replace if damaged.
___ Check to make sure all shields and guards are
properly installed and in good condition. Be sure
that either the discharge shield or complete vac-
uum attachment is installed.
___ Check that all hardware and cotter pins are prop-
erly installed and secured.
___ Check that equipment is properly and securely
attached to tractor.
___ Inspect area and remove stones, branches or
other hard objects that might be thrown, causing
injury or damage.
___ Check all lubrication points and grease as
instructed in Tractor Stability, page 10.
___ Make sure driveline spring-activated locking pin
or collar slides freely and is seated firmly in trac-
tor PTO spline groove and in gearbox spline
groove.
___ Do not allow riders.
___ Consult local utilities before digging. Know loca-
tion of and avoid contacting all underground
cables, pipelines, overhead wires and other haz-
ards in digging area.
___ Check condition of stump grinder teeth before
operation.