Woods Equipment SG100 Grinder User Manual


 
Safety 7
SG100 Safety Rules (Rev. 6/16/2006)
Keep all persons away from operator control
area while performing adjustments, service, or
maintenance.
Tighten all bolts, nuts, and screws to torque
chart specifications. Check that all cotter pins are
installed securely to ensure equipment is in a safe
condition before putting unit into service.
Make sure shields and guards are properly
installed and in good condition. Replace if damaged.
When lubricating telescoping PTO drives, keep
fingers out of shield access slots to prevent injury.
STORAGE
Block equipment securely for storage.
Do not climb or lean on equipment stored on
stand.
Keep children and bystanders away from stor-
age area.
SAFETY RULES
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!