Woods Equipment SG100 Grinder User Manual


 
Safety 9
SG100 Safety Rules (Rev. 2/16/2007)
SAFETY & INSTRUCTIONAL DECALS
ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
Replace Immediately If Damaged!
CRUSHING AND
PINCHING HAZARD
Be extremely careful
handling various parts of the
machine. They are heavy and
hands, fingers, feet, and
other body parts could be
crushed or pinched between
tractor and implement.
Operate tractor controls from
tractor seat only.
Do not stand between tractor
and implement when tractor
is in gear.
Make sure parking brake is
engaged before going
between tractor and
implement.
Stand clear of machine while
in operation or when it is
being raised or lowered.
FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD
RESULT IN SERIOUS INJURY
OR DEATH.
WARNING
1002941-A
7 - PN 102941
33347E
9 - PN33347
BE CAREFUL!
Use a clean, damp cloth to clean safety decals.
Avoid spraying too close to decals when using a pressure washer; high-pressure water can enter
through very small scratches or under edges of decals causing them to peel or come off.
Replacement safety decals can be ordered free from your Woods dealer. To locate your nearest
dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and
Canada call 1-800-319-6637.
DANGER
ROTATING DRIVELINE
CONTACT CAN CAUSE DEATH
KEEP AWAY!
DO NOT OPERATE WITHOUT -
All driveline guards, tractor and
equipment shields in place
Drivelines securely attached at both ends
Driveline guards that turn freely on
driveline
18864-C
10 - PN 18864
MODEL NO. SERIAL NO.
Woods Equipment Company
Oregon, Illinois, U.S.A.
11 - Serial Number Plate
540 RPM
WARNING
18866-D
5 - PN - MS-171
6 - 18866