Filter
Top Products
20 Freedom SW 230V Installation Guide
Installing the Inverter/Charger
Step 2: Mounting the Inverter/Charger
Considerations
Before mounting the Freedom SW 230V, take the following two
factors into account.
1. The weight of the inverter/charger requires two people to install it.
2. Mounting considerations are shown in Figure 5 on page 21.
The Freedom SW 230V dimensions and location of the mounting
holes are provided in Figure 5 on page 21.
Mount your inverter/charger before you connect any wires or
cables.
To mount the inverter/charger:
1. Remove the inverter/charger from its shipping container.
2. Verify that all components are present.
3. Select an appropriate mounting location and orientation. To meet
regulatory requirements, the Freedom SW 230V must be
mounted in one of the orientations shown in Figure 5 on page 21.
4. Mark the position of the mounting holes.
5. Pilot drill the six mounting holes.
6. Fasten the inverter/charger to the mounting surface with six M6
steel screws or bolts.
HEAVY ITEM
The Freedom SW 230V Inverter/Charger is heavy (see “Inverter/Charger
Physical Specifications” on page 51)
. The unit is too heavy for one
person to install safely. It is recommended that two people lift and mount
the unit. Always use proper lifting techniques during installation to
prevent personal injury.
Failure to follow these instructions can result in minor or moderate
injury.
Freedom SW 3K2K 230V InvChg Install Guide.book Page 20 Friday, June 20, 2014 9:11 AM