Filter
Top Products
22 Freedom SW 230V Installation Guide
Installing the Inverter/Charger
Wall Mount DC on Left A - Yes
B - Yes when used with
inverter drip shield
(PN: 808-9004) for
marine installations.
A - On a vertical surface with DC terminals
facing left.
B - On a vertical surface with DC terminals
facing left with the front panel facing up.
The drip shield is installed on top of the
inverter with some clearance. See “Drip
Shield Placement (Inverter Front Panel
Facing Up)” on page 64.
Wall Mount DC on Right A - Yes
B - Yes when used with an
inverter drip shield
(PN: 808-9004) for
marine installations.
A - On a vertical surface with DC terminals
facing left.
B - On a vertical surface with DC terminals
facing right with the front panel facing down.
The drip shield is installed directly on top of the
inverter. See “Drip Shield Placement (Inverter
Front Panel Facing Down)” on page 65.
Orientation
Approved Mounting
Orientation? Comment
MODEERF SW 0003
MODEERF SW 0003
AB
MODEERF SW 0003
MODEERF SW 0003
A
B
Freedom SW 3K2K 230V InvChg Install Guide.book Page 22 Friday, June 20, 2014 9:11 AM