Filter
Top Products
975-0697-01-01 35
Installing the Inverter/Charger
This guide for use by qualified personnel only.
8. Turn the battery switch on again (if you opened it in Step 2.)
9. Route the sensor cable to the inverter/charger and plug it into
the blue BTS port, as shown in Figure 12. Secure the cable
along its length.
Figure 12 Connecting the BTS Cable to BTS Port
FREEDOM SW 3012
Inv
erter
Reset Enable
Inve
rter AC/
Enabled
Cha
r
ge Fault
FREEDOM SW 3012
BTS port
Freedom SW 3K2K 230V InvChg Install Guide.book Page 35 Friday, June 20, 2014 9:11 AM