Fort Assembly
Phase 3
Phase Notes
• Assemble with hardware as shown.
Parts needed:
• (5) M2 - FLOOR BOARD - W101143
• (3) N1 - FLOOR SUPPORT - W101152
Hardware needed:
• (30) BR - SCREW PFH 8x1-1/8 - H100088
• (6) GW - L BRACKET BLUE 54 x 67 - H100158
• (12) BL - SCREW TAPPING 14x3/4 - H100083
Note: It is vital that the fort
be level before and after
each phase of assembly.
M2
GW
BR
BL
N1
Step 1: Place Floor Supports 'N1' on
Floor Boards 'M2' approximately 3
11/16" from both edges of 'M2' boards
and attach the remaining 'N1' support,
as shown. Attach N1 supports to 'M2'
boards using screws 'BR', as shown.
Finally, secure L-Brackets 'GW' to 'N1'
supports using screws 'BL', as shown.
Step 2: Attach Floor Panel
to Floor Brace 'H1' using
screws 'BL', as shown.
BL
GW
H1
