A SERVICE OF

logo

Phase Notes
• Assemble with hardware as shown.
Slide Attachment
Phase 1
B
AD
CM
Hardware needed:
• (3) B - NUT BARREL WH 5/16x5/8 - H100004
• (3) AD - WASHER LOCK EXT 12x19 - H100031
• (3) CM - BOLT WH 5/16x1/2 - H100115
Parts needed:
• (1) SLIDE ASSEMBLY
Step 3: Attach the Slide Assembly to
the fort floor using the Safe-T-Fuse
hardware, as shown.
Step 1: Center the wave slide
assembly in the opening opposite the
swing beam assembly, as shown.
Step 2: Using a drill with a 3/8" bit,
drill a hole through the holes on the
slide and through the fort floor.
2 5/8"
5"
5"
SLIDE DRILLING PATTERN