Swing Beam Attachment
Phase 1
Phase Notes
• Assemble with hardware as shown.
BG
AJ
BX
CD
BX
CD
HC
CY
Parts needed:
• (1) SWING BEAM ASSEMBLY
• (1) HC - BACKYARD DISCOVERY ID TAG - A100164
Hardware needed:
• (4) BG - T-NUT 5/16 - H100074
• (4) BX - WASHER SPLIT 5/16 - H100095
• (4) CD - WASHER FLAT 8x27 - H100105
• (4) AJ - BOLT HEX 5/16x1-1/4 - H100042
• (4) CY - SCREW PFH 8x5/8 - H100128
G1
G1
Step 1: Attach the Swing Beam
Assembly to 'G1' Tarp Swing Cross
Beam using Bolts 'AJ', Washer 'BX' &
Washer 'CD' through the angle
brackets & 'G1' cross beam and into
T-Nut 'BG' that will need to be
hammered in the holes on the
backside of 'G1', as shown.
Step 2: Attach Backyard Discovery ID
Tag 'HC' on Swing Beam 'SB70' using
Screws 'CY', as shown.
