A SERVICE OF

logo

51
Installing the Auto Document Feeder
Before installing the ADF, be aware that it is large and heavy.
Clear a wide space around the scanner before unpacking and
installing the ADF. You may need to have someone help you
lift it.
1. Make sure your scanner is turned off, then
unplug the scanner’s power and interface
cables.
2. Remove your scanner’s document cover by
grasping it beside the hinges and lifting it
straight up.
3. Insert the installation
screws that came with
the ADF into the holes
in the back of the
scanner and secure them
with the enclosed
screwdriver, as shown.
4. Place the two knobs
included with the ADF
beside the scanner.