53
8. Peel off the backing from
the stopper and from the
paper out support
provided with the ADF.
Then attach the stopper
and paper out support to
the scanner as shown.
Insert the tabs on the
paper out support into
the slots at the right end
of the document table.
If the ADF misfeeds, first make sure the stopper and paper
out support are in place and correctly installed.
9. Close the ADF and reattach all the scanner cables. Then turn on the scanner.
Follow these guidelines when you place your document in the ADF:
For additional instructions on scanning with the ADF, see your electronic
EPSON
Expression 836XL User’s Guide
.
Type of
document
Using the TWAIN driver Using the ISIS driver
One-sided
document
Place the document stack face up,
bottom edge first. Use your software
to re-order the scanned pages.
Place the document stack face
down, top edge first. Use the
1 to N setting.
Two-sided
document
Place the document stack face up,
bottom edge first. Use your software
to rotate the “back side” pages.
Place the document stack face
down, top edge first. Use the
1 to N setting.
paper out
support
stopper
