The Device Settings tab contains the following controls:
■ Form to Tray Assignment options
■ Font Substitution Table options
■ External Fonts option (HP PCL 6 Unidriver only)
■ Installable Options options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the media size in each input tray.
The HP Color LaserJet 2820/2830/2840 all-in-one supports more than one source of media. You can
assign a form (which defines the media size and margins) to each of your printer media sources. When
a form is matched to a source, you can select the form when you print. The printer prints from the tray
to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
media size that is loaded into each available input tray. The use of forms constrains the choices that
are available in the media-size list on the Advanced tab in the Printing Preferences driver tab set.
This constraint prevents (or reduces the likelihood of) tying up the printer with paper-mount messages
that occur when users request sizes or types that are not available.
The trays listed in the Form to Tray Assignment setting include standard trays and optional accessory
trays. Generally, items that are installed separately have a separate Installable Options setting. For
example, for the HP Color LaserJet 2820/2830/2840 all-in-one, tray 2 is listed in both the Form to Tray
Assignment setting and the Installable Options setting.
The input trays listed in the Form to Tray Assignment setting are also listed as media sources on the
Paper/Quality tab.
Configuring the trays
1 Select the appropriate tray in the Form to Tray Assignment list.
2 Use the drop-down menu to select the media size (form) that is loaded in that tray.
3 Repeat steps 1 and 2 for the remaining trays.
4 Click OK to enable your settings, or, if necessary, click the Cancel button to reconfigure all the trays,
and remove the size and type constraints that you have specified on the Paper/Quality tab.
Font Substitution Table
Clicking this option opens the Font Substitution Table and makes available the options for changing
the TrueType-to-PostScript font mapping. The following illustration shows the Device Settings tab with
the Font Substitution Table open.
ENWW
HP PCL 6 and PS emulation unidriver features (for Windows 2000 and Windows XP)
91
Windows HP unidriver
features
