Filter
Top Products
106 Chapter2
Instrument Functions: A - L
Display
Instrument Functions: A - L
2.4.4 Active Fctn Position
Selects the screen position for the Active Function Display. Depending on the type of trace
date being viewed, you can move the Active Function Display position for less visual
interference with your screen data.
Key Path:
Display
Readback: The selection of the position to display the active function (Top, Center,
Bottom) reads back to line 3 of this key.
State Saved: Not saved in instrument state, survives power cycle and preset.
Factory Preset: No effect, persistent variable, survives power cycle and preset.
Factory Default: Center. Pressing
System, Restore Sys Defaults will reset to factory defaults.
History: Added with firmware revision A.04.00
Remote Command:
:DISPlay:AFUNction:POSition BOTtom|CENTer|TOP
:DISPlay:AFUNction:POSition?
Example: :DISP:AFUN:POS BOT
2.4.4.1 Top
Displays the active function in the top-left corner of the display.
Key Path:
Display, Active Fctn Position
Readback: Top reads back to line 3 of this key.
State Saved: Not saved in instrument state, survives power cycle and preset.
Factory Preset: No effect, persistent variable, survives power cycle and preset.