Agilent Technologies E4443A Saw User Manual


 
Chapter 2 131
Instrument Functions: A - L
File
Instrument Functions: A - L
2.5.1.1 Type
Allows you to select the desired type of instrument-data files to be displayed. Common
types of instrument data files include trace data, limit line data, and amplitude correction
data. See
FileTypes”onpage127for more information The catalog displays all files (if Type
is set to All) or files of the currently selected file type. All directories are always displayed.
Key Path:
File, Catalog
State Saved: Type is not saved in the instrument state
Factory Preset: Type survives
Factory Preset and *RST,butissettoState at power on.
Remote Command:
There is no remote command for this key.
2.5.1.1.1 All
Displays all files located in the selected directory. If selected, it applies to
Catalog, Delete,
Copy,andRename.
Key Path:
File, Catalog, Type
2.5.1.1.2 State
Displays all state files (STA) in the selected directory. State files contain most instrument
settings. If selected, it applies to all
File functions.
Key Path:
File, Catalog, Type
Type Format Destination Extension
State State STA
Trace Trace + state Trace 1, 2, 3, or all traces TRC
Comma separated trace values Trace 1, 2, 3, or all traces CSV
Limit Internal data format LIM
Screen Bitmap GIF
Reverse bitmap GIF
Metafile WMF
Reverse metafile WMF
Corrections Internal data format ANT, CBL, OTH,
and AMP
Measurement
Results
Comma separated values CSV