Filter
Top Products
1-12
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
Chapter 1 Introducing the Cisco Application Deployment Engine 2130 and 2140 Series Appliance
Hardware Features
Ethernet Port Connector
Figure 1-7 shows the Ethernet RJ-45 port and plug.
Figure 1-7 RJ-45 Port and Plug
Table 1-10 lists the RJ-45 pin signals used on the connector.
Serial (Console) Port
The Cisco ADE 2130 and 2140 Series appliance has two standard serial (console) ports. The appliance
comes with a console port cable kit, which contains the cable and adapter to connect a console terminal
(an ASCII terminal or PC running terminal-emulation software). The console cable kit includes the
following items:
• RJ-45-to-RJ-45 rollover cable (light blue)
• RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL)
Use the configuration/setup utility program to change the port address assignments.
Table 1-9 Ethernet Cabling Guidelines
Type Description
10BASE-T EIA Categories 3, 4, or 5 UTP (2 or 4 pairs) up to 328 ft (100 m)
100BASE-TX EIA Category 5 UTP (2 pairs) up to 328 ft (100 m)
1000BASE-T EIA Category 6 (recommended), Category 5E or 5 UTP
(2 pairs) up to 328 ft (100 m)
210222
8 7 6 5 4 3 2 1
RJ-45 connector
Table 1-10 Ethernet Port Pinout
Ethernet Port Pin Signal Description
1 BI_DA+ Bidirectional pair A, +
2 BI_DA- Bidirectional pair A, -
3 BI_DB+ Bidirectional pair B, +
4 BI_DC+ Bidirectional pair C, +
5 BI_DC- Bidirectional pair C, -
6 BI_DB- Bidirectional pair B, -
7 BI_DD+ Bidirectional pair D, +
8 BI_DD- Bidirectional pair D, -