Filter
Top Products
viii
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
About This Guide
Document Revision History
The following Document Revision History table records technical changes to this document. The table
shows the document revision number for the change, the date of the change, and a brief summary of the
change.
Objectives
This guide explains how to prepare your site for installation, how to install the Cisco ADE 2130 and 2140
Series appliance in an equipment rack, and how to troubleshoot and maintain the appliance. After
completing the appliance installation procedures covered in this guide, you then use the appropriate
publications to configure your appliance.
Warranty, service, and support information is located in the Cisco Information Packet that shipped with
your appliance.
Audience
This guide is designed for personnel who install, configure, and maintain the Cisco ADE 2130 and 2140
Series appliance. To use this hardware publication, you should be familiar with internetworking
equipment and cabling, and have a basic knowledge of electronic circuitry and wiring practices.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Organization
The major sections of this hardware installation guide are listed in the following table.
Revision Date Change Summary
78-18579-02 April 2, 2008 Updated guide with correct banner photo, added Document
Revision History, revised the “Attaching the Inner Slide Rails to
the Appliance” section on page 3-8, revised Table 1-2 on
page 5, Table 1-3 on page 5, Table 1-6 on page 10, Table A-2 on
page 7, and fixed inconsistencies with some figures for on-line
and PDF versions.
78-18579-01 February 22, 2007 Changed document to printed document from on-line document.
OL-14301-01 December 17, 2007 Initial release.