Filter
Top Products
3-12
Cisco Application Deployment Engine (ADE) 2130 and 2140 Series Appliance Hardware Installation Guide
78-18579-02
Chapter 3 Installing the Cisco ADE 2130 and 2140 Series Appliance
Cisco ADE 2130 and 2140 Series Appliance Power
This section contains the following topics:
• Connecting the Appliance AC Power, page 3-12
• Connecting the Appliance DC Power and Ground, page 3-13
Connecting the Appliance AC Power
When installing the appliance, use the provided AC power cord.
The AC power cord is considered the primary disconnect for the appliance and must be readily accessible
when installed. If the appliance power cord is not readily accessible for disconnection then you must
install an AC power disconnect for the entire rack. This disconnect must be readily accessible, and it
must be properly labeled as the controlling power to the entire rack, not just to the appliance.