Filter
Top Products
PROBLEM CAUSE SOLUTION
Saw blade tends to push wood to 1. Blade is heeling.
one side when cross cutting.
2. Column tube is loose in column
support.
3. Arm is loose or misaligned.
4. Fence/tables are not straight.
5. Blade or teeth are bent or dull.
1. See Squaring the Blade to the
Fence in Adjustments section.
2. See Adjusting the Column
Tube in Assembly section.
3. See Setting the Arm Lock
Wheel in the Assembly section.
4. Check with square; sand or
replace.
5. Sharpen or replace the blade.
See the removal procedure in
Assembly section.
57 CI_I_FTSMR_I° RADIALSAW315.273731