Filter
Top Products
System Operation
®
Optimal Operating Temperatures
The minimum operating temperature for the DigiTrak locating equipment is -4°F (-20°C). All battery-
operated equipment is prone to “capacity loss” in cold temperatures. Excessively cold temperatures can
result in slow display response and increased measurement errors. The maximum temperature for
receivers and remote displays is 176°F (80°C). Operation in direct sunlight can cause temperatures
greatly in excess of the air temperature. The maximum temperature for transmitters varies between
180°F (82°C) and 220°F (104°C) depending on the model—see Transmitter Specifications at end of
Transmitter Section.
General Maintenance
Please observe the following general maintenance requirements:
¾ Turn off all equipment when not in use. Remove the batteries from the receiver and/or the remote
display when done using the equipment.
¾ Do not ship any DigiTrak locating equipment with the batteries inside. Always remove the batteries
from the equipment before shipping.
¾ Do not use chemicals to clean the transmitter.
¾ Do not leave the transmitter in the housing overnight.
¾ Store the DigiTrak equipment in cases, away from heat, cold, and moisture. Perform tests to confirm
proper operations.
¾ Do not disassemble or attempt to repair DigiTrak locating equipment.
¾ Contact DCI at 425-251-0559 or 800-288-3610 or visit our web site at
www.digitrak.com to stay
current with the latest innovations.
3-3000-00g-F
34 DigiTrak
®
Mark III Operator’s Manual