Filter
Top Products
Parts
334135B 53
Air Cylinder, 24V933 and 24V934
† Available in kit LC0092. ◆ Available in kit LC0091.
NOTICE
The four long screws (303) that attach the two drive blocks (309,310) must be tightened in a crisscross pattern.
Failure to do so may result in air cylinder damage. Refer to page 42 for rebuild instructions.
FIG. 19
Ref Part Description
Quantity
24V933, MOTOR,
air, 3.0
24V934, MOTOR,
air, 4.5
301 107571†◆ PACKING, o-ring 1 1
302 120875◆ O-RING 1
104131† PACKING, o-ring 1
303 120880 SCREW 4 4
304 120881 BEARING 1 1
305 120884 SCREW 1 1
306 120932◆ O-RING 2
104271† PACKING, o-ring 2
307 121141 FITTING, elbow, swivel 2 2
308 15K790 TUBE, air, cylinder, 3.0 1
15K789 TUBE, air, cylinder, 4.5 1
309 15K791 BLOCK, air cylinder, rod end 1 1
310 15K792 BLOCK, air cylinder, blind end 1 1
311 15K793 PISTON 1
15K794 PISTON 1
312 15K795 ROD, piston, air cylinder 1 1
Finger tighten all (4) bolts prior to wrench tightening. For wrench tightening, turn each bolt 1/4 turn in a cross pattern until
all (4) bolts are torqued to 350 in-lb (40 N•m).
Torque to 1200 in-lb (136 N•m).
Coat all sliding surfaces with lubricant, part 115982.
Apply sealant tape to npt fittings.
1
2
3
4
2
303
310
306
308
305
311
302
306
309
301
304
312
307
307
1
4
3
3
3
3
3
4