Filter
Top Products
Maintenance
309298J 27
Fig. 17. Clean the Inline Fluid Filter
8. Clean the retaining ring (1), tip guard (3), air cap
(40), and spray tip (4) with a soft brush daily, mini-
mum. Replace any damaged parts. Be careful not to
damage the electrode (40a).
9. Wipe off the parts with a dry cloth. Be careful not to
damage the electrode.
10. Check the electrode (40a). Replace if damaged.
11. Install the spray tip, page 19.
12. Install the spray tip and air cap, tip guard, shroud,
and retaining ring, page 19. Be sure the electrode
(40a) is in place.
13. Test gun resistance, page 29.
CAUTION
Do not use metal tools to clean the
air cap or spray tip holes as this
could scratch them, and make sure
the electrode is not damaged.
Scratches in the air cap or spray tip
or a damaged electrode can distort
the spray pattern.
TI1725A
20
P
Q
WARNING
Fire, Explosion, and Electric Shock Hazard
To reduce the risk of fire, explosion, or elec-
tric shock, never operate the gun with a
damaged electrode.