Filter
Top Products
Introduction
309298J 7
Changing the kV Setting
The gun’s full voltage setting is 85 kV. Three lower volt-
age settings are possible by actuating the KV1 and KV2
switches. Supply 50 psi (0.35 MPa, 3.5 bar) air pressure
to the KV1 and KV2 ports. Turn the air on or off as
shown in Table 1 to set the desired voltage.
The solenoid valves used to activate the KV1 and KV2
switches must bleed the air out of the lines for the
switches to draw back to the higher voltage setting.
Table 1: KV1 and KV2 Switch Settings
KV1 Air KV2 Air Output Voltage (kV)
OFF OFF 85
OFF ON 70
ON OFF 60
ON ON 45